View unanswered posts | View active topics


Post a new topicPost a reply
Previous topic | Next topic 

User avatar   Trainee TraineeMember since: 01.11.2007, 07:21Posts: 152Location: Savannah, Georgia Likes: 1
 

 Post Topic: >>>VENERANCE<<< [Halo Mod]
PostPosted 17.07.2012, 23:19 
Image

Aloha, fellow tube-surfers of the internet!

The team working on Venerance is sharing with you some of the work that they've been up to and we hope that you like what you're seeing so far.

You may have seen our June Update post in other locations, but it was brought to our attention that this sub-forum within CryDev might be an even better place for it.

We really are just getting started on this and we are actively seeking to swell our ranks with folks looking to either push the ultimate game engine to its limits with their creations, explore the details of the extended Halo fiction, or some combination thereof; currently we are locking in decent placeholder assets while our design guys and 2D Art guys nail down the designs and finer details for the ultra-high-detail assets we plan to throw into the engine by project's end.

Here you can see our work on the first iteration of the placeholder low-poly model for the UNSC Frag Grenade that we'll be using, along with a placeholder texture from one of our modelers to use while we seek out talented texture artists for making the ultra high-resolution textures that we want for the project:

Image
Image

Here you can see our first iteration on the placeholder low-poly model for the UNSC Anti-Air gun, the Scythe:

Image

And here you can see our first iteration of the placeholder model for Venerance's take on the SPARTAN-upsized Misriah Armory M6D (yes, that's "D" as in "Death") Pistol with extended magazine and, shown separate from it, the modular silencer and targeting laser assembly familiar to fellow fans of Halo 3: ODST:

Image

Here you can see an early WIP of the placeholder model for Venerance's take on the Kig-Yar Point Defense Gauntlet, also known as the Jackal Shield Generator:

Image

Here you can see an early WIP of the placeholder model for Venerance's take on the Plasma Grenade:

Image

And here is some of the concept art for the first-person arms done by Halo community members Levi Hoffmeier and Garrett Post.

Here is the first iteration, from Levi:

Image

And here is a WIP for the second iteration via Garrett:

Image

Now here are some "Iteration 1" brainstorming pieces done by Levi for what the arms look like after being wrapped in MJOLNIR armor:

Image
Image
Image

Here is a brainstorming close-up of the armored arm and its modular nature, courtesy of Garrett:

Image

Perhaps you have never heard of our project before today? That's fine, here is some of the content we've already put out into the wild, starting with existing concept art.

Here is a moody piece of Concept Art courtesy of Garrett; very atmospheric, it's meant to brainstorm a scene in the jungles of Sigma Octanus IV outside the city of Cote d'Azur:

Image

Here is yet another imagining of being in that alien jungle, but this time from the first-person perspective:

Image

And here is a great speculative piece of a UNSC Communications Center located planetside:

Image

Here Garrett brainstorms the Venerance take on the Kig-Yar's best friend, the Covenant Carbine:

Image

And here is a concept piece for the pistol seen modeled earlier:

Image

One of my personal favorites, here is an image of the Venerance take on the MA5B(S), complete with jungle camouflage pattern and extended magazine:

Image

For those of you interested in designing and implementing HUDs, here Garrett brainstormed some ideas for how the Venerance HUD might look inside of the helmet of what is essentially a Mark V helmet without energy shielding tech:

Image

And from Leviathan, here is an awesome helmet study of the Mark 4 and 5 helmets seen in Halo canon thusfar (we'll be synthesizing the Venerance helmet out of these helmets and other information available to us):

Image

Speaking of armor, Garrett took it upon himself to brainstorm the MJOLNIR armor underneath the green plasma-resistant plating and came up with these fantastic images:

Image
Image
Image
Image
Image
Image

We are actively seeking folks, especially folks who would be able to fill the slots that are currently open in our content creation assembly line. There are two kinds of ways to be involved in creating for Venerance: you can be a Contributor/Participant who doesn't have a lot of time to dedicate to the project but still wants to be a part of the magic... or, you can apply to be a Developer who does have the time to consistently engage in the team's productive shenaniganry; either way you'll be working with the most powerful game engine out there to help bring a great take on the Halo extended fiction to life, all within Microsoft's Game Content Usage Rules. =)

Beginners are not only welcomed, they are encouraged. We're all using this to learn and get better at our various crafts. Worst case scenario for a beginner who isn't sure of whether or not their work would end up being used in the final version of the mod is that it isn't used in the final version of the mod, but they got a lot better at what they do by exerting themselves, and they may have very well had their creations used as placeholders until the later versions came along.

Here are some examples of the kinds of folks we're actively seeking right now:

2D Artists
Most Desired Skills:
•Either familiar with the Halo universe or able to get acquainted with it authentically (able to stay true to the spirit of Halo while it is rendered in the CryEngine 3 at higher fidelities).
•Able to integrate new ideas into existing designs (you'll be working with designers to transate ideas into a visual form).
•Able to depict the same item from at least two angles.

Texture artists
Most desired skills:
• Familiar with unwrapping UV's
• Able to create high quality textures for organic and/or inorganic models (we will be using the highest resolution textures that we can get away with: we are pushing the CryEngine 3 as far as we can with the most powerful hardware available; for instance, we are looking at taking full advantage of 3 unreleased nVidia cards in SLI)
• Familiar with Photoshop and exporting files as TIFFs
• Familiar with the ins and outs of creating and implementing textures in CryEngine 3

Riggers
Most desired skills:
• Proficient with rigging characters for CryEngine 3
• Proficient at rigging weapons for CryEngine 3
• Familiar with 3DS Max

AnimatorsMost desired skills:
• Familiar with CryEngine 3
• Able to animate characters that have emotions, weight, and a believable feel to them that helps bring the in-game world to life.

Plusses:
• Ability to make stellar first-person animations
• A familiarity with 3DS Max

Environment Artists
Most desired skills:
• Familiar with CryEngine 3.
>>>(These openings are more for folks who love creating terrain, placing objects, painting vegetation, creating your own vegetation, etc. If this is you, then you will likely have a lot of fun because our level size will be quite large. The areas in the level are designed to have intense atmospheres that evoke all manner of emotions.)<<<

Character Artists
Most desired skills:
• Familiar with either Mudbox or Z-Brush
• Able to make high resolution models and then bake them onto low poly meshes (We have an absolutely massive budget for textures and polygons on our character models, so you will really be able to go wild with it. All that matters is the quality at this point.)
• Familiar with the anatomies of Halo characters and able to make believable characters utilizing art provided to them by our 2D Art Team Members.

Programmers
Most desired skills:
• Familiar with scripting in CryEngine 3
• Well-acquainted with Lua, C+, and/or C#.

If you fit the bill for any of these things, Venerance would benefit from your contributions or participation!

To get in contact with us, you have a plethora of options:

Our website (http://www.Venerance.net)

Twitter (https://twitter.com/#!/VeneranceMod)

Facebook (https://www.facebook.com/venerancemod)

CryDev.net (project_db.php?action=project_profile&team_id=1411&project_id=1371)

Or, the best way to get in touch is probably just to shoot an email to AngelicLionheart_at_gmail.com. That is my email and, as Co-Lead, part of my job is keeping things organized, answering questions, and linking you people up together. =)

If you message us but do not get a reply, don't panic: there may have simply been an error and we may have not received your message. Please try another means of contacting us, we're very interested in hearing from you. =)

One of our current focuses is to get the entire "SPARTAN-II first-person experience" completed by the end of this summer (Labor Day in the US, September 3rd).

What that means for players is that we want for you to have the ability to play as a SPARTAN-II through the Crysis 1, 2, and 3 campaigns while you wait on us to get the rest of the mod done. That way, you aren't exactly twiddling your thumbs while you wait on the completion of the mod, which will likely be some time given our quality bar. You can instead be experiencing a taste of what's to come. So jump in and help us out! We think it's going to be phenomenally cool and we welcome all folks interested in jumping into the fray with us! The more help we get, the faster it can get done!

If you still have no idea what we're talking about at all, check out our website, http://www.Venerance.net, to see what this is all about; our announcement of our existence was initially made on January 17th. There at our website you can read things like our "About" section with things like info on the story:



All of humanity is being slaughtered. Slowly. Methodically. Unstoppably.

Having done nothing to merit such atrocities, yet dying all the same, we are desperate and terrified. We don't even understand why it's happening. We haven’t a clue.

When the murderers show up out of nowhere and without warning, with their incredible technologies and their implacable hatred, we do the best that we can to slow them down, but we know that all we can hope for is a brief respite from the slaughter. Our morale has dropped to subterranean levels. Suicides and depression are at an all time high. Those who don’t choose to give up the fight, fight in sheer defiance.

This has been going on for the longest 27 years in humanity’s history. Our future is bleak, at best. Non-existent, at worst.

The enemy is without remorse. In them is no pity at all. To them, we are little more than vermin skittering about, defiling everything we touch. They will burn us into nothingness or they will utterly exhaust themselves in the effort. Anyone who speaks up to suggest otherwise is branded a heretic and is immediately purged from amongst their ranks.

What can be done in the face of such bone-chilling horror? What can be said in the face of such inescapable damnation?

Enter the SPARTAN-II.

The Covenant thought that it had come to know the best of the best in combat prowess. Their warrior elite, the Sangheili, were from birth made to understand that their only worth in life was their success on the battlefield. Strong, fast, agile, and cunning, the Sangheili were indisputably the razor’s edge of what was possible in battle.

That is, until humanity was put to the test.

When 75 six-year-old human beings of flawless biology were requisitioned by the Office of Naval Intelligence in the face of certain doom by man’s own hand, prior to an awareness of the existence of alien races, the likeness of the Divine was put to the test as each child was made to understand that they were specially selected to save the world, and that without their success, without their victory, their mothers and fathers and brothers and sisters and everyone everywhere would die, and it would all be their fault for failing to save them because they were the only ones who could. Regardless of the degree to which that was true at the time they were told, it was certainly true later. For one boy in particular. And thus began the forging of the fiercest and most successful warriors that the galaxy could remember.

Fast-forward to 2552. It is July. John and the rest of Blue Team step foot onto the surface of a planet under siege by the Covenant. He and his team have accomplished such success in groundside action against the Covenant that the enemy has come to believe that he and his kind are not mere mortals, but supernatural demonic holocausts made flesh. He has become their Devil, and his fellow SPARTAN-IIs are all demons whose unholy bloodbath of history against the holy troops of the Covenant puts hesitation into even the most stout of Covenant hearts; absolute dread into all others.

He and his team have been sent down from above to infiltrate behind enemy lines, and discover whatever it is that the enemy is attempting to keep secret. For The Covenant to actually occupy a human city is unusual, and the Office of Naval Intelligence hopes to gain an edge in the overall war by finding out why.

On this covert mission with 10,000+ enemy troops on the ground, expert stealth is a must. But after Blue Team’s objective has been completed, nuclear devastation is a definite.

Suit up, Blue-Five. Our future is in your hands.



We look forward to hearing from you! =D

  Beginner BeginnerMember since: 24.10.2010, 01:28Posts: 53 Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 21.08.2012, 17:51 
I really like the reinterpretations of the weapons. I'm not to keen on the Halo 2 styled pistol though. Is there any chance of the more bulbous look from Halo 1/3/Reach returning?
User avatar   Trainee TraineeMember since: 01.11.2007, 07:21Posts: 152Location: Savannah, Georgia Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 24.08.2012, 22:37 
Quote by xalener:
I really like the reinterpretations of the weapons. I'm not to keen on the Halo 2 styled pistol though. Is there any chance of the more bulbous look from Halo 1/3/Reach returning?


The pistol you'll be seeing in Venerance is essentially the jungle camo'd M6D version of the pistol in the following image:
Image


God adores you more than you can possibly comprehend.
Image
User avatar   Experienced Modder Experienced ModderMember since: 01.07.2011, 21:28Posts: 436 Likes: 0
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 24.08.2012, 22:48 
the Automag?
User avatar   Trainee TraineeMember since: 01.11.2007, 07:21Posts: 152Location: Savannah, Georgia Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 25.08.2012, 07:58 
Quote by ClockworkOnion:
the Automag?


More or less. :)

Here's more info on the M6 series of pistols, as seen on Bungie.net:

Quote:
M6C/SOCOM

The M6 Personal Defense Weapon System is the standard sidearm family of the UNSC. The M6 family is designed primarily for ruggedness and reliability. Certain models have been ‘up-sized’ to be used by Spartan’s in Mjolnir armor. Even though the 'Spartan" issue pistols are larger than the standard-issue variants (~117%) they can still share magazines.

The M6 series are recoil-operated and magazine-fed. It fires 12.7mm x 30 semi-armor-piercing high-explosive ammunition (standard issue). M6 series handguns are issued in three different finishes: hard chrome, black polymer, and electroless nickel.

The M6C/SOCOM variant has an integrated sound suppressor.

Official Designation: M6 PDWS (Personal Defense Weapon System)

Common Slang Terms: Go-mag, cannon, hand cannon, power drill, HE pistol, heavy pistol

Cartridge: 12.7mm x 40 SAP-HE (semi-armor-piercing, high-explosive)
Max. effective range: 50m
Mag. capacity: 8 rounds (6, 12 in some models)
Rate of fire: DAO
Unit cost: 1615 cR.
Dimensions:
• Length o/a: 22.86 cm (9 in.) standard
• 26.7 cm (10.5 in.) 'up-sized'
• Weight (loaded/12 rnds): 1.8 kg (4.09 lbs) standard
• 2.7 kg (5.95 lbs) 'up-sized'

Variants:
• M6A: standard issue/black polymer finish
• M6B: 'Officer's model'—issued with smart-linked scope [KFA-2]/hard chrome finish
• M6C: 'up-sized', standard issue/black polymer finish
• M6C/SOCOM: accurized—issued with smart-linked scope [VnSLS/V 6E]/black polymer finish
• M6D: 'up-sized', 'Officer's model'—issued with smart-linked scope [KFA-2]/hard chrome finish
• M6E: standard issue/electroless nickel finish
• M6F: 'Officer's model'—issued with smart-linked scope [KFA-2]/electroless nickel finish
• M6G: 'up-sized', standard issue/electroless nickel finish
• M6H: 'up-sized', 'Officer's model'—issued with smart-linked scope [KFA-2]/electroless nickel finish
• M6I: select-fire variant; detachable shoulder-stock/black polymer finish
• M6J/C: carbine variant; 355mm barrel, detachable shoulder-stock/electroless nickel finish
• M6K: police 'undercover' variant; 6 rnd magazine capacity/black polymer finish


And here's the relevant text from the novel The Fall of Reach which describes the pistol you will see in Venerance:

Quote:
They double-checked their gear: modified MA5B assault rifles, adapted to mount silencers; ten extra clips of ammunition; frag grenades; combat knives; M6D pistols—small but powerful handguns that fired .450 Magnum loads, sufficient to crack through Grunt armor.


Given that this is a stealth-oriented mission, the integration of a sound suppressor into the pistol is a logical step. We're looking forward to showing what the M6D(S) can do. :)


God adores you more than you can possibly comprehend.
Image
User avatar   Beginner BeginnerMember since: 23.03.2012, 23:32Posts: 31 Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 26.06.2013, 02:05 
Are you guys still around, i checked your website there hasn't been a post since February.
User avatar   Trainee TraineeMember since: 01.11.2007, 07:21Posts: 152Location: Savannah, Georgia Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 26.06.2013, 02:24 
Quote by scope11:
Are you guys still around, i checked your website there hasn't been a post since February.


We're definitely still around. :) We've hit some fairly big roadbumps, no doubt, but we're still here.

Our main splash page for the website is horribly cobwebby and in need of updating, but if you check the forums, there's been some recent activity, though nothing to get excited about. That sort of activity won't come until... well, we'll see. ;) Soon-ish.

Running something like this for free and using an all-volunteer force has proven trickier than I had at first anticipated. Definitely still happening, though.

Thanks for checking in to make sure!


God adores you more than you can possibly comprehend.
Image
User avatar   Trained Modder Trained ModderMember since: 06.02.2013, 02:45Posts: 254Location: New York Likes: 13
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 31.07.2013, 08:34 
"Riggers
Most desired skills:
• Proficient with rigging characters for CryEngine 3
• Proficient at rigging weapons for CryEngine 3
• Familiar with 3DS Max"

I can help with this


3d Artist - Shisno Entertainment
User avatar   Skilled Modder Skilled ModderMember since: 29.04.2009, 21:39Posts: 650Location: England Likes: 17
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 05.09.2013, 01:20 
Quote by AngelicLionheart:
Running something like this for free and using an all-volunteer force has proven trickier than I had at first anticipated.

Not quite the reason, close but not quite.


Image
User avatar   Beginner BeginnerMember since: 20.09.2008, 00:38Posts: 22Location: France Likes: 6
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 06.09.2013, 00:11 
Very Cool project !
  Beginner BeginnerMember since: 02.05.2011, 17:53Posts: 16 Likes: 0
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 10.09.2013, 09:06 
I doubt we'll be seeing any updates on this project for a while.
Practically everyone who was working on this has left the project to move onto newer, more retaining ventures.
I think there's only 2 people left working on this and only one of those is even able to make any assets for the mod.
All the models and concept art you see in here, the people who made those have gone off to do other,better things.

As of this moment, I am now officially retracting any support given to this project, nothing I provided may be used for this project either.
User avatar   Trainee TraineeMember since: 01.11.2007, 07:21Posts: 152Location: Savannah, Georgia Likes: 1
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 11.09.2013, 07:54 
Quote by Cobby:
As of this moment, I am now officially retracting any support given to this project, nothing I provided may be used for this project either.


Best of luck in your new ventures!

Quote by Cobby:
I doubt we'll be seeing any updates on this project for a while.
Practically everyone who was working on this has left the project to move onto newer, more retaining ventures.
I think there's only 2 people left working on this and only one of those is even able to make any assets for the mod.
All the models and concept art you see in here, the people who made those have gone off to do other,better things.


Absolutely false.

For anyone reading this that has any concern over what Cobby has falsely claimed here, just know that Cobby has not been in a position to know much of anything about the work being done on our project for quite some time. This includes information about who has joined up and who has not gone anywhere during our extended public silence. He and one other former team member are no longer counted among our (slowly growing) ranks, and that's the sum total: 2 people, total, have left. They have their reasons, and I can respect that.

Cobby has a lot to offer any mod team, and anyone who asks me if he's any good should go straight to his previously posted work and see for themselves. He studies and researches and learns a lot. He's only going to get better at his craft, and from personal conversations with him, I have every reason to believe that he will soon be getting a huge boost in his experience and prowess.

Anyone who wants to know any further information is welcome to PM me: I would be happy to dispel any concerns that you might have. :) Just know that I will not be bad-mouthing either of the two former team members, nor will I disclose any information about them that they would not want me to. (Personally, I consider such things very unprofessional, not to mention a waste of rarely available spare time that we could be putting toward the project or any number of other "offline" things that take up our spare time. I won't be engaging in any petty arguments or such on forums, either, which I'm sure CryDev and others will appreciate -- so if further posts (containing false claims or whatever else) are made in the vein of Cobby's most recent posts in this thread, or like the other former member's in another thread, I will not be responding to them, and I will be encouraging the other team members to follow suit. ...therefore, I'd take whatever Cobby and the other former team member claim about the project with a grain of salt. Well, actually, I just wouldn't take it at all, salt or no salt, but it's ultimately up to you.)

As Project Lead, I apologize to everyone waiting on our next update for this inconvenience of not being able to control whether or not private squabbles between team members spill over into the main threads related to our project. I suppose it might just come with the territory of working with volunteers on topics we all have strong opinions about, but regardless, it's inconvenient to you and for that I apologize. Here's to our next update. Cheers!


God adores you more than you can possibly comprehend.
Image
  Beginner BeginnerMember since: 02.05.2011, 17:53Posts: 16 Likes: 0
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 11.09.2013, 12:55 
Majority of the concept art was done by Garret who, last I spoke to had gone off to do something else,Leviathan is off doing his stuff, the models you see in this thread were done by myself and Alex, Alex has gone to work for a company and I've gone to follow my own pursuits.

As Art Director, I would know who was doing what, the fact is, you've not actually got much done in the past several months, you're forgetting skype records conversations, all of them.
I have logs of what's been said, what's been going on and what hasn't.

Last I recall, you were refusing to even open the SDK editor because you weren't willing to learn the tools yourself, thus why the others left.

If anyone would like a detailed explanation of why both a co-founder of the project, three 3D modeling artists, two concept artists and a sound designer left the project, you're more than welcome to contact me.
It may be a day or so before you hear a reply because I've just started a bachelors award in Games development and design and still getting messages from Vancouver film school about them wanting me to study there.
User avatar   Trainee TraineeMember since: 10.12.2012, 12:46Posts: 143Location: Italy Likes: 7
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 14.09.2013, 13:05 
Man with such list of people to hire and that heavy packed suit gotta be very smelly under,
for a simple mod!


i'm not quiting yet, it just that i'm experiencing
some seriouse hardware issues ..! ...
goodbye gt8800..meanwhile i'm checking

SpeedTree
  Beginner BeginnerMember since: 23.09.2013, 05:50Posts: 10 Likes: 0
 

 Post Topic: Re: >>>VENERANCE<<< [Halo Mod]
PostPosted 29.09.2013, 08:27 
Hey guys. I'm new to Cryengine, but I do have experience in Developing. I've figured out a lot of the mapping and detailing parts of Cryengine 3. I use the free SDK by the way. Anyways, I'm a huge halo fanatic and expert. I've read the books, played the games, and everything. I also do concept art and artwork. I'd like to be a part of Venerance if I still can. I'll attach some of my artworks. Currently, I'm working on a map that almost resembles Valhalla or Ragnarok. Anyways, your concept looks great and it will be a great game. I don't have that much time to work on this stuff. Probably several hours on weekends, but only an hour or two during weekdays. I have school but I can balance out these projects. Thanks.
Attachments:

hangin up.png